Fast Shipping - Made in the USA - Quality Customer Service 2-Foot Foam Bow Cutter EPS and XPS cutting tool New Hot Wire Foam Factory #051 2-Foot Bow Cutter with Single-Heat Pro Power Supply Proudly Made in the USA!   Includes: 2-Foot Bow Single-Heat Pro Power Supply (110-230 volt input, works in all countries) Four 2-foot cutting wires 10 feet in extension wires (from power to bow) Printed Instructions   Features: Starts cutting immediately Cuts continuously without overheating Power switch conveniently on the bow and on the power supply Large diameter sturdy yet lightweight body Comfortable rubber coating Made and supported in the USA   Used For: Cutting Styrofoam, white beaded EPS, EIFS and extruded XPS foam Cutting, slicing, and notching large sheets and blocks of foam Cutting down insulation foam at building construction sites Large theatrical and studio props and backdrops Model airplane wings Surfboards Garden décor, like fake boulders and waterfalls Tech Specs: The cutting wires will last indefinitely if you follow the instructions Easy user replaceable cutting wires Over 2 feet of clearance between arms, 2 feet in 2-foot mode 10 inches clearance from cutting wire to the bow handle Longer arms for deeper cuts are available Made of thick industrial strength aluminum and ABS to last a lifetime     Our Hot Wire tools work best on rigid polystyrene foams, also known as expanded polystyrene (also known as EPS, Styrofoam or bead-board foam) and extruded polystyrene foam (also known as XEPS or XPS or insulation foam).   If you are unsure whether or not this tool will cut the foam you intend to cut, please contact us before buying. The Hot Wire tools will cut many kinds of foam, but always check with the foam manufacturer to make sure there are no health or safety hazards when using hot wire tools.     NOTE: Polyurethane foam (aka upholstery foam) should not be cut with hot wire tools. It needs a ton of heat, gives off toxic fumes, and leaves a lot of melted plastic wherever it is cut. We recommend that the polyurethane foams only be cut with a blade or saw.PAYMENTSHIPPINGWARRANTY/RETURNSPAYMENTSHIPPINGWARRANTY/RETURNSWe accept payment by any of the following methods: PayPal, Visa, Amex, Discover, MasterCard Buyers in California will be charged 8% sales tax. Please pay as soon as possible, as that will allow us to ship your item to you sooner! Packages are always insured. We ship within 2 business days (So if you order Monday, your order will ship by Wednesday). Weekends and holidays do not count as business days. We are not responsible for any customs fees, duties, taxes or tariffs imposed by the destination country which you may have to pay. USA - FedEx & USPS (United States Postal Service)    Canada/Mexico - USPS (United States Postal Service) International Worldwide (Except Hong Kong or China) - USPS (United States Postal Service) International Limited Warranty & Limitation of Liability Information: This product is warranted for non-commercial use as follows: For 90 days from the original date of purchase, HWFF, Inc. will, at its option, repair or replace a defective unit free of charge, if the unit is defective due to an original manufacturer’s defect. This warranty covers normal use and does not cover damage which occurs in shipment or unit failure which results from alteration, accident, misuse, abuse, or neglect. Except as herein expressly set forth, HWFF, Inc. shall not under any circumstances be responsible for any direct, indirect, incidental, or consequential damage resulting from the use of the equipment. The consumer’s sole remedy shall be such repair or replacement as expressly provided above. Return Policy: HWFF, Inc. retains the exclusive and sole right as to whether an item may be returned, exchanged, or order cancelled. HWFF, Inc. thus encourages customers to use caution when placing an order, as once placed the order cannot be cancelled, nor the item returned or exchanged unless HWFF, Inc. expressly consents. In order to obtain a refund or exchange, prior approval must be given by HWFF, Inc.. Generally, HWFF, Inc. will consider returns within thirty (30) days of purchase with a 20% restocking charge. Refunds are for the cost of product only; shipping and handling charges are not refundable. Buyer is responsible for return shipping. Please ask any questions you may have prior to buying. New Hot Wire Foam Factory #051 2-Foot Bow Cutter with Single-Heat Pro Power Supply Proudly Made in the USA! Includes: --- 2-Foot Bow --- Single-Heat Pro Power Supply (110-230 volt input, works in all countries) --- Four 2-foot cutting wires --- 10 feet in extension wires (from power to bow) --- Printed Instructions Features: --- Starts cutting immediately --- Cuts continuously without overheating --- Power switch conveniently on the bow and on the power supply --- Large diameter sturdy yet lightweight body --- Comfortable rubber coating --- Made and supported in the USA Used For: --- Cutting Styrofoam, white beaded EPS, EIFS and extruded XPS foam --- Cutting, slicing, and notching large sheets and blocks of foam --- Cutting down insulation foam at building construction sites --- Large theatrical and studio props and backdrops --- Model airplane wings --- Surfboards --- Garden décor, like fake boulders and waterfalls Tech Specs: --- The cutting wires will last indefinitely if you follow the instructions --- Easy user replaceable cutting wires --- Over 2 feet of clearance between arms, 2 feet in 2-foot mode --- 10 inches clearance from cutting wire to the bow handle --- Longer arms for deeper cuts are available --- Made of thick industrial strength aluminum and ABS to last a lifetime Our Hot Wire tools work best on rigid polystyrene foams, also known as expanded polystyrene (also known as EPS, Styrofoam or bead-board foam) and extruded polystyrene foam (also known as XEPS or XPS or insulation foam). If you are unsure whether or not this tool will cut the foam you intend to cut, please contact us before buying. The Hot Wire tools will cut many kinds of foam, but always check with the foam manufacturer to make sure there are no health or safety hazards when using hot wire tools. NOTE: Polyurethane foam (aka upholstery foam) should not be cut with hot wire tools. It needs a ton of heat, gives off toxic fumes, and leaves a lot of melted plastic wherever it is cut. We recommend that the polyurethane foams only be cut with a blade or saw. Fast Shipping - Made in the USA - Quality Customer Service 2-Foot Foam Bow Cutter EPS and XPS cutting tool New Hot Wire Foam Factory #051 2-Foot Bow Cutter with Single-Heat Pro Power Supply Proudly Made in the USA!   Includes: 2-Foot Bow Single-Heat Pro Power Supply (110-230 volt input, works in all countries) Four 2-foot cutting wires 10 feet in extension wires (from power to bow) Printed Instructions   Features: Starts cutting immediately Cuts continuously without overheating Power switch conveniently on the bow and on the power supply Large diameter sturdy yet lightweight body Comfortable rubber coating Made and supported in the USA   Used For: Cutting Styrofoam, white beaded EPS, EIFS and extruded XPS foam Cutting, slicing, and notching large sheets and blocks of foam Cutting down insulation foam at building construction sites Large theatrical and studio props and backdrops Model airplane wings Surfboards Garden décor, like fake boulders and waterfalls Tech Specs: The cutting wires will last indefinitely if you follow the instructions Easy user replaceable cutting wires Over 2 feet of clearance between arms, 2 feet in 2-foot mode 10 inches clearance from cutting wire to the bow handle Longer arms for deeper cuts are available Made of thick industrial strength aluminum and ABS to last a lifetime     Our Hot Wire tools work best on rigid polystyrene foams, also known as expanded polystyrene (also known as EPS, Styrofoam or bead-board foam) and extruded polystyrene foam (also known as XEPS or XPS or insulation foam).   If you are unsure whether or not this tool will cut the foam you intend to cut, please contact us before buying. The Hot Wire tools will cut many kinds of foam, but always check with the foam manufacturer to make sure there are no health or safety hazards when using hot wire tools.     NOTE: Polyurethane foam (aka upholstery foam) should not be cut with hot wire tools. It needs a ton of heat, gives off toxic fumes, and leaves a lot of melted plastic wherever it is cut. We recommend that the polyurethane foams only be cut with a blade or saw.PAYMENTWe accept payment by any of the following methods: PayPal, Visa, Amex, Discover, MasterCard Buyers in California will be charged 8% sales tax. Please pay as soon as possible, as that will allow us to ship your item to you sooner! SHIPPING Packages are always insured. We ship within 2 business days (So if you order Monday, your order will ship by Wednesday). Weekends and holidays do not count as business days. We are not responsible for any customs fees, duties, taxes or tariffs imposed by the destination country which you may have to pay. USA - FedEx & USPS (United States Postal Service)    Canada/Mexico - USPS (United States Postal Service) International Worldwide (Except Hong Kong or China) - USPS (United States Postal Service) International WARRANTY/RETURNS Limited Warranty & Limitation of Liability Information: This product is warranted for non-commercial use as follows: For 90 days from the original date of purchase, HWFF, Inc. will, at its option, repair or replace a defective unit free of charge, if the unit is defective due to an original manufacturer’s defect. This warranty covers normal use and does not cover damage which occurs in shipment or unit failure which results from alteration, accident, misuse, abuse, or neglect. Except as herein expressly set forth, HWFF, Inc. shall not under any circumstances be responsible for any direct, indirect, incidental, or consequential damage resulting from the use of the equipment. The consumer’s sole remedy shall be such repair or replacement as expressly provided above. Return Policy: HWFF, Inc. retains the exclusive and sole right as to whether an item may be returned, exchanged, or order cancelled. HWFF, Inc. thus encourages customers to use caution when placing an order, as once placed the order cannot be cancelled, nor the item returned or exchanged unless HWFF, Inc. expressly consents. In order to obtain a refund or exchange, prior approval must be given by HWFF, Inc.. Generally, HWFF, Inc. will consider returns within thirty (30) days of purchase with a 20% restocking charge. Refunds are for the cost of product only; shipping and handling charges are not refundable. Buyer is responsible for return shipping. Please ask any questions you may have prior to buying. New Hot Wire Foam Factory #051 2-Foot Bow Cutter with Single-Heat Pro Power Supply Proudly Made in the USA!   Includes: 2-Foot Bow Single-Heat Pro Power Supply (110-230 volt input, works in all countries) Four 2-foot cutting wires 10 feet in extension wires (from power to bow) Printed Instructions   Features: Starts cutting immediately Cuts continuously without overheating Power switch conveniently on the bow and on the power supply Large diameter sturdy yet lightweight body Comfortable rubber coating Made and supported in the USA   Used For: Cutting Styrofoam, white beaded EPS, EIFS and extruded XPS foam Cutting, slicing, and notching large sheets and blocks of foam Cutting down insulation foam at building construction sites Large theatrical and studio props and backdrops Model airplane wings Surfboards Garden décor, like fake boulders and waterfalls Tech Specs: The cutting wires will last indefinitely if you follow the instructions Easy user replaceable cutting wires Over 2 feet of clearance between arms, 2 feet in 2-foot mode 10 inches clearance from cutting wire to the bow handle Longer arms for deeper cuts are available Made of thick industrial strength aluminum and ABS to last a lifetime     Our Hot Wire tools work best on rigid polystyrene foams, also known as expanded polystyrene (also known as EPS, Styrofoam or bead-board foam) and extruded polystyrene foam (also known as XEPS or XPS or insulation foam).   If you are unsure whether or not this tool will cut the foam you intend to cut, please contact us before buying. The Hot Wire tools will cut many kinds of foam, but always check with the foam manufacturer to make sure there are no health or safety hazards when using hot wire tools.     NOTE: Polyurethane foam (aka upholstery foam) should not be cut with hot wire tools. It needs a ton of heat, gives off toxic fumes, and leaves a lot of melted plastic wherever it is cut. We recommend that the polyurethane foams only be cut with a blade or saw.